How to Hard Reset a Candy Dishwasher

If your Candy dishwasher is not starting, stuck on a program, or showing blinking lights, you can try the following hard reset methods, which work for many Candy dishwasher models, including older ones.

---

Method 1: Basic Reset

1. Unplug your dishwasher from the wall outlet.
2. Wait at least 60 seconds for the internal circuits to discharge.
3. Plug the dishwasher back in.
4. Press and hold the Start or Program button (depends on your model) for 5 to 10 seconds, until you hear a beep or see the LEDs blink.
5. Close the door.
6. The dishwasher should now be reset and ready for a new cycle.

Note: This method works on many modern Candy dishwashers.

---

Method 2: Hidden Reset Using the P1 Button

If the first method didn’t work, try this:

1. Press and hold the P1 button on the control panel.
2. While holding the P1 button, turn the power on and off five times.
   • You should hear a beep for each power cycle.
3. Once all the LED lights on the panel turn on, release the P1 button.
4. Close the dishwasher door.
5. Press and hold the P1 button again until only the P1 LED and timer LED remain on.
6. The dishwasher has now been successfully reset and is ready for use.

Note: This method may not work on all models, but many users have found it effective on older series Candy dishwashers.

---

Additional Notes

• If a reset method worked, consider sharing your model in the comments to help others.
• If neither method works, further troubleshooting or professional service may be required.

---

Thank you for watching!